Feetech Sm30bl Brushless 30kg. Cm Serial Control Bus Servo RS485

12V 30kg High Precision Double Ball Bearing Smart Serial Bus Brushless Robot Servo SM30BL

Feetech smart servo is specifically designed for applications that require a lot of strong and complex actuation, 
such as humanoid robots, hexapod robots, and robotic arms. 
these servos are capable of 360°continuous rotation while 
still offering position control over an effective range of 360°. 
RS485 4P interface that is used to configure and control the servo and get feedback about position, speed, and temperature. 
Multiple servos can be daisy-chained on the same serial bus.
 

Specifications:

Feature:

Big Torque:30/60Kg/80kg. cm

Large Angle:360 turns(Arbitrary absolute relative)

DC 6.5V~13V power supply

0.088 °Position resolution

Dual output shaftfit for robot joint

High precision all metal gear set,Double ball bearing

Full Aluminium alloyCNC case,Good cooling effect

Position servo control mode ,rotation range 0-360°and many turns Arbitrary absolute relative angle.

In the speed control mode ,can be continuous rotation,adjust speed

Duplex asynchronous T T L  / 4 8 5  Communication level

Daisy chain connection, 254 ID can choose

High reach  1M  Baud  rate

333Hz servo update rate

Can give feedback on  position,temperature,voltage,speed and  current load

Use open  FT SCS Serial asynchronous communication protocol

SM30BL robot servo adopts advanced servo control technology and 32 bit high speed ARM microprocessor, fast response, accurate positioning without jitter.

Compared to the traditional RC servo 50Hz control frequency, the SM30BL series robot servo through the control frequency of up to 333Hz, to ensure the accuracy of position control and maintain the stability of the moment.

The SM30BL robot servo uses 12 bits high precision magnetic encoder to measure the position, the servo output shaft may rotate continuously for a whole week, the movement torque output is as high as 80kgf.cm.

  SM30BL has serial bus interface, the 254 robot servo can form a chain through the bus. Each servo can be set with different node addresses, multiple servo wheels can be unified motion can also be a single independent control.

The communication instruction set of SM30BL  is completely open, and the servo communicates with the host computer through the asynchronous serial interface. The SM60 can be set to either the motor mode or the position control mode by sending commands through the asynchronous serial interface.

In motor mode, SM30BL can be used as DC motor, speed adjustable; in position control mode, 0-360 degrees and multi circle arbitrary absolute and relative angle can be controlled within this range with accurate position control performance, speed control.

SM30BL robot servo and the founder of the multi-directional installation, user-friendly flexible model.

Company Information

   our servos is very competitive and sell well on the market this year.We have some new products online now,I am sure you could make money on it.So introduce it for you

       We mainly offer :

              1,FITEC/FEETECH micro/small servo:2.5g,4.3g,5g,6g,7.5g,8g,9g,with ball bearing,9g ,9g with metal gear,9g metal gear digital servo,

             2,FITEC/FEETECH standard servo:3kg.cm,6kg.cm,7kg.cm low profile digital servo,9kg.cm(Waterproof),13kg.cm(Waterproof),15kg.cm(Waterproof),17kg (Waterproof)   21kg (Waterproof) 25kg (Waterproof) 

               3,FITEC/FEETECH Titanium gear servo:

               4,FITEC/FEETECH large torque servo:18kg.cm,20kg.cm,30kg.cm,40kg.cm rc servos.
-Standard digital Titanium gears servo,2BB
-Coreless motor,Aluminium middle hull 
Our Services

There are 5 outstanding advantages of our servos, as follows,
1. The quality: our material has very good quality especially our 4 beginning servos----titanium gear, aluminum middle hull, dual ball bearing and so on. All our servos start producing after our servos get very good marks in testing. Recently, our company is producing an full metal case titanium gear digital servos with high spead which
which can be up to 0.06 sec/60.
2. The price: Our price are quite competitive whatever in China or in the world. If you have any interest in our servos, I will give you the price list.
3. The service: if there is wrong with the quality of servos, we will offer the replace defective items or replace a new one.
4. The appearance and package: they looks high-grade.
5. We have our own brand Feetech, but we can also do OEM and print your logo on servos as you need. Of course, the quantity must be a little higher! Which model do you interested to test on first time?

Service:
1."Reasonable price,delivery on time,good services" is our business principle
2.We have own factory,specialized in this field many years, warmly welcome your design
3.Small order and mixed items are available
4.Fast delivery as most of products we have in stock
5.Competetive price and good quality.
6.samples and products according to customers' requirement