Basic Info.
Shape
Airplane/Helicopter
Specification
33.7*20*10.7mm
Product Description
FlySky FTr4 2.4GHz 4CH AFHDS 3 RC Receiver Support PWM/PPM/I.bus/S.bus Output Compatible NB4 PL18 for RC Drone Fixed Wings Gliders
OVERVIEW:
Nexus V2 is equipped with high performance decoding chip and can do the most advanced low
latency algorithm for HD video transmission. The whole system latency is estimated to be 70ms
and reach up to 7km transmission distance, also adapt to multiple antennas for different application
purposes. This digital link device enables real time aerial photography in full HD resolution.
5.8GHz high frequency comes with better anti-interference feature and guarantees high image quality.
Dual signal output can do auto switch, one for 1080p micro HD camera and the other for HDin. It also
has wide working voltage range 7-26V for different power supplies. The kit perfectly supports MAVLink
protocol, can do overlapping display and set up for the OSD data at receiver, support both HD video
recording in transmitter and receiver
Product Details
Product Model: FTr4
PWM channel: 4
Wireless frequency: 2.4GHz
Wireless protocol: AFHDS 3
Range: > 3500m (air)
Antenna type: Single antenna (50mm)
Power: 3.5-8.4V
RSSI: Supported
Data port: PWM / PPM / i.bus / s.bus
Temperature range: -10 ºC - + 60 ºC
Humidity range: 20% -95%
Online Update: Yes
Dimensions: 33.7*20*10.7mm
Weight: 4.9g
Binding:
1. Insert the bind cable into the receivers bind port
2. Plug the power cable into any other port, and the receivers LED will start to flash quickly indicating that it has entered bind mode
3. Put the transmitter into bind mode; (See the transmitters instruction manual for more information)
4. Binding is successful when the receivers LED will stop flashing
Remove the power and bind cables from the receiver.
5. Reconnect the power cable to the receiver
6. Check to make sure that the transmitter and receiver are working as expected, if there are any issues or unexpected operation follow the steps above to bind again.
Note:
Ports used to connect the receiver to the various components
BAT: Separate power supply interface for the receiver
BIND: For bind cable
i BUS: Connects to the i bus module for channel expansion
CH 1-CH 4: Connects the servos, power supply or other components
Note: Refer to the transmitter's or sensor's user manual
for further information on how to connect and set up sensors
If after an update the transmitter is unable to connect or bind to the receiver, it is necessary to put the receiver into forced update mode
1. nsert the bind cable and CH4 as shown to short the pins and enter forced update mode
2. Then go to the RX Setup menu and select RX update as normal
3. updating is successful when the receiver status indicator flashes slowly
This function protects the user by preventing the model from behaving unexpectedly if signal is lost.
Make sure to setup the failsafe function on the transmitter. For more
information on setting up the failsafe refer to the transmitters user
manual
- When a receiver has been rebound to the transmitter the failsafe function will reset to its default settings
Attention:
Make sure the product is installed and calibrated correctly, failure to do so may result in serious injury.
Make sure the receiver's battery is disconnected before turning off the transmitter, failure to do so may lead to unintended operation or loss of control.
Make sure the receiver is mounted away from motors, electronic speed controllers or any device that emits excessive electrical noise.
Keep the receiver's antenna at least 1 cm away from conductive materials such as carbon or metal.
Do not power on the receiver during the setup process to prevent loss of control.
Item Packing
FTr4 Receiver x 1
Detailed Images
Why choose us?
Shipping Discount: With the well partnership of various shipping companies and forwarder including EMS, Fedex, TNT, UPS, DHL, you can save a lot buying from us.
Sourcing: Finding a new products from China to sell locally is easy, our purchasing centre located at the major wholesale market in China, you can just send us the targeted product photography, we can source it for you within a speedy timeframe.
Direct Deal with factory: We are the direct agent of several famous Toy factories in china, offering you the wholesale price which you can not find locally.
Communication: You may communicate with our sale team via Skype/What's app/Wechat/QQ instantly to get the most updated price, information and shipping information for your order. Normally, our sale man is available within your local office hours. Certainly, you can also phone us to check any information you needed.
Combined Shipment: We provide you an ONE-STOP service you really needed when buying from China. From translation, quotation, quality check, shipment arrangement, shipping discount, and even combined shipment packing. Don't waste your time to deal with different factories and only get seperated shipment.
Address:
2Floor, NO. 60, Pusha Road, Liuyue Community, Henggang Street, Longgang District, Shenzhen, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Toys
Company Introduction:
Shenzhen Feixiang Model Co., Ltd. Was established in 2003, We deal with various kinds of R/C hobbies and R/C toys. Such as R/C Multicopter, R/C Drone, R/C Airplane, Gas Airplane, R/C car, R/C boat, R/C Robot, RC accessories, etc. We export to all over the world. Now we enjoy a very good credit in the overseas market.
We supply the most competitive products with lower price and higher quality. We do business based on a simple formula: Give our customers the product they want at a fair price, ship those parts fast, and back them with the best customer service.
Your satisfaction is our best rewards, we will do our best to meet your requirement and are sincerely looking forward to develop mutual beneficial business relationship with you!
We sincerely welcome you to be our business partner, and hope we can develop a fruitful business.
